American Coding & Marking Ink

ACMI 6050 Black Epoxy Ink

ACMI 6050 Black Ink is a two component semi-paste air or heat cure epoxy.  6050 Ink has superior adhesion to epoxy, glass, metal or other nonporous surfaces. When properly cured, 6050 has excellent resistance to abrasion, MEK, alcohol, TCE, flux removers, salt, acid and alkali solutions.  American Coding & Marking Ink 6050 Black Epoxy Ink is designed for rubber stamping or offset printing.  This ink meets CID-A-A-56032D Types I, II & III (Formerly: MIL-I-43553b) for Epoxy based marking inks.

ACMI 6050 Black Epoxy Ink is a room temperature cure ink that dries to handle in 6-8 hrs. and requires 4-7 days to develop solvent resistance. May be force cured by baking.

POT LIFE: Under normal conditions, 4-5 hrs. after the 2 components are mixed.
Higher room temperature will shorten pot life.

SHELF LIFE & STORAGE: Use within 1 year is recommended. Storage in refrigerator is suggested.

THINNER: ACMI #6050 Thinner. Use a minimal amount to achieve the desired consistency.
Use only ACMI thinner, as others will adversely affect this ink.

CLEANER: ACMI #6000 Cleaner

ONCE CURED, THEY’RE THERE FOR GOOD!

*due to raw material shortages, 6050 has been reformulated.  Contact us today for more information.  

For additional information and specifications on a particular epoxy ink, refer to the corresponding Data Sheet for that ink.

Safety Precautions: Comply with all local safety, disposal and transportation regulations. Check the Safety Data Sheet (SDS) and label of the individual products carefully before using the products. SDS’s are available on request.

 Check out our Current Sales and follow us on FacebookLinkedIn, Instagram and Twitter

Specifications

Label Value
Meets: CID-A-A-56032D Types I, II & III (Formerly: MIL-I-43553b)
*Ensure all required specifications are listed when requesting a quote or placing an order, as not all specifications are tested at the time of production.

Documents

Title File
Technical Data Sheet Download