44GN098 is a chrome-free, water reducible, chemically cured, polyamide primer with corrosion inhibiting properties.
- Corrosion inhibiting
- Excellent adhesion
- Chemical and solvent resistant
- Resistant to immersion in hydraulic fluids, lubricating oils, phosphate ester based hydraulic fluids and distilled water
44GN098 Water Reducible Primer is compatible with the following topcoat specifications:
-DMS 2115 -MIL-PRF-85285
Instructions for Use
Mix ratio (by volume):
44GN098 (base component) 2 parts
44GN098CAT (catalyst component) 1 part
Reducer (Distilled or Deionized water) 4 TO 4 ½ parts water by volume (RANGE 135% TO 150%)
Stir or shake the base component. Do not stir or shake the base component longer than 5 minutes. Pour two volumes of base component into a separate clean container. Slowly add the one volume of catalyst to the two volumes base component. Mix by hand stirring, paint shaker or mechanical mixing to ensure the base/catalyst mixture is homogeneous. Do not shake or mechanically mix material for longer than 5 minutes. Add approximately 4 volumes (135%) of distilled or deionized water. Slowly add the water in one-third increments, mixing thoroughly after each addition, until fully incorporated and homogeneous. Be sure to scrape the sides and bottom of the container.
Note: It is important to condition the paint for 24 hours prior to mixing by placing all materials in the shop or hangar, with ambient temperatures between 13° and 35°C (55° to 95°F). The minimum temperature of the paint components should be 13°C (55°F) prior to mixing
Surface Preparation and Pretreatments
44GN098 Water Reducible Epoxy Primer can be applied over clean, dry, intact aluminum surfaces treated with materials conforming to MIL-DTL-5541 or equivalent.
Safety Precautions: Comply with all local safety, disposal and transportation regulations. Check the Safety Data Sheet (SDS) and label of the individual products carefully before using the products. SDS’s are available on request.