10P4-2NF Fluid Resistant Epoxy Primer is a chemically cured epoxy primer providing excellent corrosion and chemical resistance.
03-R-64 Red Polyurethane Topcoat is a chemically cured, polyurethane topcoat intended for use on exterior application on aircraft and aerospace equipment. When used over properly applied commercial or military primers, it provides excellent protection against weathering, humidity and salt spray.
01-GY-85F Gray Epoxy Topcoat is a chemically cured, two-component, high solids epoxy topcoat for use on aircraft and aerospace equipment. When used over properly applied commercial or military primers it provides excellent adhesion and flexibility. 01-GY-85F is resistant to immersion in hydraulic fluids, lubricating oils and water. It provides excellent chemical resistance to solvents and is Volatile organic hazardous air pollutants-free (VOHAP-free).
44GN054 is a two-component, fast dry, water reducible, chemically cured, high solids, epoxy-polyamide primer.
03-GY-287 Gray Polyurethane Topcoat is intended for exterior application on aircraft and aerospace equipment. Meets MIL-PRF-85285 Type I
Chemically cured, two-component, polyurethane topcoat
03-Y-91 Yellow Polyurethane Topcoat is intended for exterior application on aircraft and aerospace equipment. Meets MIL-PRF-85285 Type I
A high solids, chemically cured, strontium chromated primer which provides corrosion, chemical and solvent resistance
A chemically cured, two-component epoxy-polyamine topcoat suitable for application on aircraft and ground equipment
Epoxy topcoat designed to provide maximum protection from various chemicals, hydraulic fluids, aviation fuels, phosphate ester (Skydrol®) fluids and corrosion causing media. Meets the BMS 10-11, Type II, Class B, Grade D
AkzoNobel 454-4-1 Integral Fuel Tank Coating is a chemically cured two component epoxy coating that provides protection from various chemicals for aircraft fuel tanks.
A two-component epoxy primer surfacer is designed to provide a durable, smooth surface.
Low VOC two-component epoxy primer.
48C31 Fuse On Clear Fuel Tank Coating is a single component blocked urethane. It meets the performance requirements of MIL-C-83019. Recommended for use on fuel tank probes.
A chemically cured, low VOC topcoat designed to provide premium gloss and distinctness of image (DOI).
A chemically cured aluminized high temperature epoxy coating.
Two component PTFE-filled, polyurethane anti-chafe air curing coating.
